Responsibilities:
Responsible for producing engineering and design deliverables necessary for tendering works and project execution according to schedule and budgets.
Works under the supervision of a Lead engineer.
Prepare and deliver project drawings, bills of material, requisitions and other project deliverables to the project lead engineer on schedule and within budget.
Conformance to contract for all discipline engineering and material.
Ensure all outputs are documented and archived according to applicable ISO Procedures and/or Work Instructions
Read and fully understand the technical requirements from customer, clarify problems.
Establish control system configuration scheme according to the process design specification and customer specification.
Prepare piping and instrumentation diagrams in cooperation with process engineer.
Responsible for detailed instrumentation design according to the established control scheme, including the detailed design of the creation of process control logic diagram, control system interconnection wiring diagrams, IO list design, instrument list, instrument datasheet prepare, instrument hook up drawing, control system functional description, E&IC local instrument and LCP location drawing, control room layout, control cabling And so on…design. Provide technical specifications DCS/PLC and instrumentation products; provide technical evaluation of the corresponding products from the vendor.
Review subcontractor’s electrical & Instrumentation design.
Individually lead the execution and proposal project as a lead engineer, in charge of the whole project coordination and technical issues. Control the project quality and document quality in order to get a good customer satisfaction.
Establish power supply scheme according to the process design, make single line diagrams, electrical load list base on system and equipment information.
Prepare electrical system specification of MV motors, LV motors, general electrical specification for mechanical package. Prepare the material requisition of the MV/LV equipment, SWGR, transformer and so on.
Cooperate with mechanical discipline on vendors’ technical documents, guide the supplier to comply with Alstom design standard. Check and review the design documents from supplier, control the quality and documents delivery schedule.
Responsible for detailed electrical design according to the established power supply scheme including the detailed design of power supply system, single line diagram design, electrical load calculation, design primary and secondary schematic diagrams for sub-supplier, review the detailed drawing of supplier, design cable routing, cable conduit design, cable tray design, power cable connection diagrams, control cable wiring diagrams for electrical devices and instruments.
Electrical room layout.
Provide bid evaluation sheet, cooperate with sourcing to evaluate the technical issue of the product.
Support site commissioning, training, operation and maintenance manual, etc. in cooperation with process engineer for the project being constructed according to the contract
Other task assigned by Discipline Manager.
Requirements:
Bachelor’s Degree in Electrical/Automation Engineering required.
Minimum >4 years of engineering experience in power plant, air pollution control system, or process plant design
Good computer skills, familiar with software such as CAD, Word, EXCEL
Good interpersonal communication skills
Ability to work closely in a team environment.
Demonstrates initiative, professionalism and a commitment to quality.
Effectively listen and take instruction from Lead Designers and/or assigned mentor
Able to learn to effectively communicate technical issues across disciplines, cultures work locations, and hierarchical level. (written and verbal)
Demonstrates initiative, teamwork and commitment
Able to learn company standard software and discipline specific technical software.
Able to work with others to produce high-quality, accurate and complete engineering documents (drawings and specifications)
Able to plan and organize
Responsible for producing engineering and design deliverables necessary for tendering works and project execution according to schedule and budgets.
Works under the supervision of a Lead engineer.
Prepare and deliver project drawings, bills of material, requisitions and other project deliverables to the project lead engineer on schedule and within budget.
Conformance to contract for all discipline engineering and material.
Ensure all outputs are documented and archived according to applicable ISO Procedures and/or Work Instructions
Read and fully understand the technical requirements from customer, clarify problems.
Establish control system configuration scheme according to the process design specification and customer specification.
Prepare piping and instrumentation diagrams in cooperation with process engineer.
Responsible for detailed instrumentation design according to the established control scheme, including the detailed design of the creation of process control logic diagram, control system interconnection wiring diagrams, IO list design, instrument list, instrument datasheet prepare, instrument hook up drawing, control system functional description, E&IC local instrument and LCP location drawing, control room layout, control cabling And so on…design. Provide technical specifications DCS/PLC and instrumentation products; provide technical evaluation of the corresponding products from the vendor.
Review subcontractor’s electrical & Instrumentation design.
Individually lead the execution and proposal project as a lead engineer, in charge of the whole project coordination and technical issues. Control the project quality and document quality in order to get a good customer satisfaction.
Establish power supply scheme according to the process design, make single line diagrams, electrical load list base on system and equipment information.
Prepare electrical system specification of MV motors, LV motors, general electrical specification for mechanical package. Prepare the material requisition of the MV/LV equipment, SWGR, transformer and so on.
Cooperate with mechanical discipline on vendors’ technical documents, guide the supplier to comply with Alstom design standard. Check and review the design documents from supplier, control the quality and documents delivery schedule.
Responsible for detailed electrical design according to the established power supply scheme including the detailed design of power supply system, single line diagram design, electrical load calculation, design primary and secondary schematic diagrams for sub-supplier, review the detailed drawing of supplier, design cable routing, cable conduit design, cable tray design, power cable connection diagrams, control cable wiring diagrams for electrical devices and instruments.
Electrical room layout.
Provide bid evaluation sheet, cooperate with sourcing to evaluate the technical issue of the product.
Support site commissioning, training, operation and maintenance manual, etc. in cooperation with process engineer for the project being constructed according to the contract
Other task assigned by Discipline Manager.
Requirements:
Bachelor’s Degree in Electrical/Automation Engineering required.
Minimum >4 years of engineering experience in power plant, air pollution control system, or process plant design
Good computer skills, familiar with software such as CAD, Word, EXCEL
Good interpersonal communication skills
Ability to work closely in a team environment.
Demonstrates initiative, professionalism and a commitment to quality.
Effectively listen and take instruction from Lead Designers and/or assigned mentor
Able to learn to effectively communicate technical issues across disciplines, cultures work locations, and hierarchical level. (written and verbal)
Demonstrates initiative, teamwork and commitment
Able to learn company standard software and discipline specific technical software.
Able to work with others to produce high-quality, accurate and complete engineering documents (drawings and specifications)
Able to plan and organize
職位類別: 自動化儀表工程師
舉報
儀控工程師職業大全:
- 公司規模:1000人以上
- 公司性質:外商獨資
- 所屬行業:電力環保類
- 所在地區:北京-朝陽區
- 聯系人:高小姐
- 手機:會員登錄后才可查看
- 郵箱:會員登錄后才可查看
- 郵政編碼:100027
工作地址
- 地址:三里屯西六街6號乾坤大廈